View 20-1B06IPB004RC-P952A40-3_8536540.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet flow ipm 1b 600 v / 4 a input rectifier, pfcboost with integrated pfcshunt, pfccontroller and dccapacitor 3 phase inverter with integrated dc shunt, gate d river circuit incl. bootstrap circuit and over current protection sense output of dccurrent temperature sensor conclusive power flow, all power connections on one side, no input output xing low power industrial drives motor integrated fans and pumps aircon electrical tools 201b06ipb004rcp952a40 20pb06ipb004rcp952a40y t j =25c, unless otherwise specified parameter symbol value unit repetitive peak reverse voltage v rrm 1600 v t h =80c 16 t c =80c 21 t h =80c 19 t c =80c 29 maximum junction temperature t jmax 150 c pfc igbt collectoremitter break down voltage v ce 650 v t h =80c 10 t c =80c 14 t h =80c 20 t c =80c 30 gateemitter peak voltage v ge 20 v maximum junction temperature t jmax 175 c types power dissipation p tot p tot i 2 t t j =t j max a i c t j =t j max t j =t j max 45 a 45 a w condition aa t j =t j max w t p =10ms 80 i 2 tvalue a 2 s i fsm power dissipation flow 1b housing target applications schematic features maximum ratings 130 t j =45c 50 hz half sine wave input rectifier diode surge forward current i fav dc forward currentdc collector current turn off safe operating area repetitive peak collector current t p limited by t j max i crm v ce 650v, t j t op max copyright vincotech 1 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet t j =25c, unless otherwise specified parameter symbol value unit condition maximum ratings pfc inverse diode t h =80c 7 t c =80c 9 t h =80c 11 t c =80c 17 pfc diode t h =80c 9 t c =80c 12 t h =80c 15 t c =80c 23 inverter transistor t h =80c 4 t c =80c 6 t h =80c 11 t c =80c 17 t sc t j 150c 8 s v cc v ge =15v 400 v inverter diode t h =80c 5 t c =80c 6 t h =80c 10 t c =80c 15 175 12 20 175600 t j =t j max 8 600 t j =t j max t p limited by t j max dc forward current v ce i c repetitive peak forward current turn off safe operating area repetitive peak collector currentpower dissipation gateemitter peak voltage collectoremitter break down voltagepeak repetitive reverse voltage t j =t j max 650 w v ce 600v, t j t j max a 8 c a a v t p limited by t j max w t j =t j max 30 a power dissipation maximum junction temperature t jmax p tot a c 175650 w aa t p limited by t j max v v 12 power dissipation repetitive peak forward current peak repetitive reverse voltagemaximum junction temperature peak repetitive reverse voltage dc forward current i f v rrm t jmax t j =t j max i f t j =t j max i frm v rrm dc forward current p tot dc collector current maximum junction temperature short circuit ratings power dissipation maximum junction temperature a 175 c t j =t j max t j =t j max t p limited by t j max i frm p tot i crm t jmax v ge v rrm p tot i f t jmax surge forward currenti 2 tvalue repetitive peak forward current i 2 t i frm i fsm a 2 s a 100 40 a w v c v t p =8,3ms 60 hz half sine wave copyright vincotech 2 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet t j =25c, unless otherwise specified parameter symbol value unit condition maximum ratings pfc shuntpfc controller* v cc 26 v t jmax 125 c * for more information see infineon's datasheet ice3pcs02 dc - shuntdc link capacitor gate driver* * for more information see infineon's datasheet 6ed003l02f2 thermal propertiesinsulation properties v is t=2s dc voltage 4000 v min 12,7 mm min 12,7 mm cti >200 comparative tracking index insulation voltagecreepage distance t op operation temperature under switching condition clearance c storage temperature t stg 40+125 c 40+(tjmax 25) max.dc voltage v max 500 t c =25c vsense voltagedc forward current maximum junction temperature vcc supply voltagevsense current freq pin voltage i f power dissipation t c =25c t c =25c w a 3,2 5,35,3 1 ma v v v cc common with gate driver ic t c =25c v vsense v f req i vsense v cc p tot input voltage (lin, hin, en) u in supply voltage v cc common with pfc driver 8 v vcc + 0.5 output voltage (fault) u out v v 20 v 10 10 a power dissipation p tot t c =25c 9 w dc forward current i f copyright vincotech 3 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max tj=25c 1,04 tj=125c 0,97 tj=25c 0,87 tj=125c 0,74 tj=25c 25 tj=125c 33 tj=25c 0,01 tj=125c thermal resistance chip to heatsink phasechange material = 3,4w/mk 3,54 k/w * chip data tj=25c 3,3 4 4,7 tj=150c tj=25c 2,18 2,22 tj=150c 2,74 tj=25c 0,04 tj=150c tj=25c 2 tj=150c 2 tj=25c 107 tj=150c 161 tj=25c 4 tj=150c 2 tj=25c 0,055 tj=150c 0,091 tj=25c 0,020 tj=150c 0,038 thermal resistance chip to heatsink r th(j-s) 4,77 * chip data tj=25c 1,17 tj=125c 0,91 thermal resistance chip to heatsink r th(j-s) 8,45 tj=25c 2,05 2,22 tj=150c 2,10 tj=25c 11 tj=150c 13 tj=25c 18 tj=150c 28 tj=25c 0,12 tj=150c 0,24 tj=25c 0,013 tj=150c 0,033 di(rec)max tj=25c 959 /dt tj=150c 452 thermal resistance chip to heatsink r th(j-s) phasechange material = 3,4w/mk 6,16 k/w * chip data 100 m mws a/s vv c v ma mws k/wk/w nsns v nc pf a u cc =15v 1200 150 400 4 u cc =15v 0 520 25 15 400 930 154 6 tj=25c 15 24 4 38 tj=25c 15 650 reverse current i r m ma vv slope resistance (for power loss calc. only) v f v to r t characteristic values forward voltage *threshold voltage (for power loss calc. only) 7 7 input rectifier diode 0,0004 value conditions 7 r th(j-s) rise time t r i ces diode forward voltage input capacitanceoutput capacitance reverse transfer capacitance gate charge pfc inverse diode turnoff energy loss per pulse turnoff delay time **turnon energy loss per pulse fall time reverse recovery time reverse recovered energy pfc diode forward voltage *peak rate of fall of recovery current reverse recovery charge peak recovery current pfc shunt r1 value c rss v f t rr v f q g q rr i rrm e rec c oss t f e off c ies e on t d(off) gate emitter threshold voltage v ge(th) collectoremitter cutoff v cesat collectoremitter saturation voltage* pfc igbt v ge =v ce phasechange material = 3,4w/mk f=1mhzphasechange material = 3,4w/mk r copyright vincotech 4 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max characteristic values value conditions tj=25c 4,4 5 5,6 tj=150c tj=25c 0,8 2,20 2,8 tj=150c 2,29 tj=25c 0,1 tj=150c tj=25c 120 tj=150c tj=25c 586 tj=150c 635 tj=25c 21 tj=150c 30 tj=25c 666 tj=150c 749 tj=25c 20 tj=150c 50 tj=25c 0,117 tj=150c 0,198 tj=25c 0,072 tj=150c 0,115 thermal resistance chip to heatsink r th(j-s) phasechange material = 3,4w/mk 8,32 k/w * chip data ** including gate driver tj=25c 0,7 2,93 2,5 tj=150c 2,83 tj=25c 2 tj=150c 3 tj=25c 166 tj=150c 254 tj=25c 0,18 tj=150c 0,35 tj=25c 25 tj=150c 16 tj=25c 0,045 tj=150c 0,085 thermal resistance chip to heatsink r th(j-s) phasechange material = 3,4w/mk 9,86 k/w * chip data 305 none 18 v nc a mws a/s mws ma ns na v ns pf v tj=25c 0,000075 c value c dc link capacitor 0 25 reverse recovery timereverse recovered energy reverse transfer capacitance turnoff energy loss per pulse inverter diode peak reverse recovery currentpeak rate of fall of recovery current output capacitance input capacitancereverse recovered charge diode forward voltage * 0 u cc =15v v in =5v 4 0400 400 4 turnon energy loss per pulse integrated gate resistor inverter transistor gate emitter threshold voltagecollectoremitter cutoff current incl. diode collectoremitter saturation voltage* i ges fall time turnoff delay time ** turnon delay time ** t r t d(off) r gint rise time gateemitter leakage current ( d i rf /d t ) max t d(on) c ies t f c rss c oss e on e off v f v ce =v ge v ge(th) v cesat i ces 20 u cc =15v v in =5v q rr t rr i rrm e rec r2 value dc - shunt r nf 100 50 m 10 4 tj=25c 600 f=1mhz 15 9 copyright vincotech 5 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max characteristic values value conditions gate driver supply voltage v cc tj=25c tj=125c 13 15 17,5 v quiescent vcc supply current i qcc tj=25c tj=125c 1,3 2 ma input voltage (lin, hin, en) v in tj=25c tj=125c 0 5 input voltage (gate) v gate tj=25c tj=125c 0 15 logic "0" input voltage (lin, hin) v ih tj=25c tj=125c 1,7 2,1 2,4 logic "1" input voltage (lin, hin) v il tj=25c tj=125c 0,7 0,9 1,1 positive going threshold voltage (en) v en, th+ tj=25c tj=125c 1,9 2,1 2,3 negative going threshold voltage (en) v en, th tj=25c tj=125c 1,1 1,3 1,5 input clamp voltage (lin, hin, en) v in, clamp i in = 4ma tj=25c tj=125c 9 10,3 12 itrip positive going threshold v it, th+ tj=25c tj=125c 380 445 510 mv input bias current lin high i l in+ v lin = 3,3v tj=25c tj=125c 70 100 input bias current lin low i l in v lin = 0v tj=25c tj=125c 110 200 input bias current hin high i h in+ v hin = 3,3v tj=25c tj=125c 70 100 input bias current hin low i h in v hin = 0v tj=25c tj=125c 110 200 input bias current en high i en+ v hin = 3,3v tj=25c tj=125c 45 120 output voltage (fault) v f lt tj=25c tj=125c 0 v cc v low on resistor of pull down trans. (fault) r on, flt v fault =0.5 v tj=25c tj=125c 45 100 pulse width for on or off t in tj=25c tj=125c 1 s turnon propagation delay (lin, hin) t on v lin/hin = 0v or 3,3v tj=25c tj=125c 400 530 800 turnoff propagation delay (lin, hin) t off v lin/hin = 0v or 3,3v tj=25c tj=125c 360 490 760 fault reset time t rst tj=25c tj=125c 4 ms fixed deadtime between high and low side t dt v lin/hin = 0v & 3,3v tj=25c tj=125c 150 310 ns v cc = 15v v lin =0v; v hin =3,3v v a ns copyright vincotech 6 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j min typ max characteristic values value conditions vcc turnon threshold v ccon 11,5 12,0 12,9 v vcc turnoff threshold v ccuvlo 10,5 11,0 11,9 v operating current with active gate i cchg c l =1nf 6,4 8,5 ma operating current during standby i ccstby 3,5 4,7 ma pfc switching fequency f swnom 20 khz dc link voltage dc2+ 339 350 361 v dc link treshold (ovp1) low to high v ovp1l2h 108 % dc link treshold (ovp1) high to low v ovp1h2l 100 % blanking time for ovp1 t ovp1 12 s dc link treshold (ovp1) hysteresis v ovp1_hys 6 8 11 % dc link treshold (ovp2) low to high v ovp2_l2h 428 443 460 v dc link treshold (ovp2) high to low v ovp2_h2l relative to ovp2 92 % blanking time for ovp2 t ovp2 12 s thermistor rated resistance r power dissipation constant tj=25c tj=100c power dissipation p deviation of r100 ?r/r tj=25c mw/k mw 2 200 12 22000 12 % tj=25c k 3950 k 3998 tj=25c bvalue b (25/50) tol. 3% tj=25c bvalue b (25/100) vincotech ntc reference tol. 3% tj=25c b *switching frequency is setable by an external resistor between pins 1416 (see figure 1 on page28 for values)**dc link voltage is setable by an external resistor between pins 1415 (see figure 2 on page28 for values) pfc controller set with an internal resistor divider** tj=25c feedback voltage v dclink /130 can be measured at vsense pin set with an internal resistor r freq =220k* relative to output voltageovp1 values varies with external resistor copyright vincotech 7 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 1 output inverter igbt figure 2 output inverter igbt typical output characteristics i c = f( v ce ) i c = f( v ce ) at at t p = 250 s t p = 250 s t j = 25 c t j = 125 c u cc from 10 v to 17v in steps of 1v u cc from 10 v to 17v in steps of 1v figure 3 output inverter fwd typical diode forward current asa function of forward voltage i f = f( v f ) at t p = 250 s output inverter typical output characteristics 0 5 10 15 20 0 1 2 3 4 v f (v) i f (a) t j = 25c t j = t jmax -25c 0 5 10 15 20 0 1 2 3 4 5 6 v ce (v) i c (a) 0 5 10 15 20 0 1 2 3 4 5 6 v ce (v) i c (a) copyright vincotech 8 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 4 output inverter igbt typical switching energy lossesas a function of collector current e = f( i c ) with an inductive load at t j = 25/125 c v ce = 400 v u cc = 15 v figure 5 output inverter fwd typical reverse recovery energy lossas a function of collector current e rec = f( i c ) with an inductive load at t j = 25/125 c v ce = 400 v u cc = 15 v output inverter 0,0 0,1 0,2 0,3 0,4 0 1 2 3 4 5 6 i c (a) e (mws) e on e off e on e off t j = t jmax -25c t j = 25c 0,00 0,03 0,06 0,09 0,12 0,15 0 1 2 3 4 5 6 i c (a) e (mws) copyright vincotech 9 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 6 output inverter igbt typical switching times as afunction of collector current t = f( i c ) with an inductive load at t j = 125 c v ce = 400 v u cc = 15 v figure 7 output inverter fwd typical reverse recovery time as afunction of collector current t rr = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v output inverter t f 0,00 0,01 0,10 1,00 0 1 2 3 4 5 6 i c (a) t ( m s) t doff t don t r t j = t jmax -25c t j = 25c 0,0 0,1 0,2 0,3 0,4 0 1 2 3 4 5 6 i c (a) t rr ( m s) copyright vincotech 10 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 8 output inverter fwd typical reverse recovery charge as afunction of collector current q rr = f( i c ) atat t j = 25/125 c v ce = 400 v u cc = 15 v figure 9 output inverter fwd typical reverse recovery current as afunction of collector current i rrm = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v output inverter t j = t jmax -25c t j = 25c 0 0,5 1 1,5 2 2,5 3 0 1 2 3 4 5 6 i c (a) i rrm (a) t j = t jmax -25c t j = 25c 0,0 0,1 0,2 0,3 0,4 0,5 0,6 0 1 2 3 4 5 6 i c (a) q rr ( m c) copyright vincotech 11 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 10 output inverter fwd typical rate of fall of forwardand reverse recovery current as a function of collector current d i 0 /d t ,d i rec /d t = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v figure 11 output inverter igbt figure 12 output inverter fwd igbt transient thermal impedance fwd transient thermal impedance as a function of pulse width as a function of pulse width z thjh = f( t p ) z thjh = f( t p ) at at d = t p / t d = t p / t r thjh = 8,32 k/w r thjh = 9,86 k/w igbt thermal model values fwd thermal model values r (k/w) tau (s) r (k/w) tau (s) 0,24 1,4470 0,21 2,7550 1,23 0,1572 0,95 0,2138 4,17 0,0448 4,60 0,0490 1,43 0,0085 1,66 0,0101 0,87 0,0021 1,33 0,0022 0,37 0,0004 1,11 0,0005 thermal grease thermal grease output inverter t p (s) z thjh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t p (s) z th-jh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 0 50 100 150 200 250 0 1 2 3 4 5 6 i c (a) di rec / dt (a/ m m m m s) di rec /dt di 0 /dt copyright vincotech 12 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 13 output inverter igbt figure 14 output inverter igbt power dissipation as a collector current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i c = f( t h ) at at t j = 175 c t j = 175 c u cc = 15 v figure 15 output inverter fwd figure 16 output inverter fwd power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i f = f( t h ) at at t j = 175 c t j = 175 c output inverter 0 5 10 15 20 25 0 50 100 150 200 t h ( o c) p tot (w) 0 2 4 6 8 0 50 100 150 200 t h ( o c) i c (a) 0 4 8 12 16 20 0 50 100 150 200 t h ( o c) p tot (w) 0 2 4 6 8 0 50 100 150 200 t h ( o c) i f (a) copyright vincotech 13 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 17 output inverter igbt safe operating area as a functionof collector-emitter voltage i c = f( v ce ) at t j t jmax oc u cc = 15 v figure 18 igbt reverse bias safe operating area i c = f( v ce ) at t j = t jmax 25 oc output inverter v ce (v) i c (a) 10 2 10 0 10 -1 10 1 10 -2 10 1 10 2 1 1 10 0 10 3 0 2 4 6 8 10 0 100 200 300 400 500 600 700 v ce (v) i c (a) i c max v ce max i c module i c chip copyright vincotech 14 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 1 pfc igbt figure 2 pfc igbt typical output characteristics typical output characteristics i c = f( v ce ) i c = f( v ce ) at at t p = 250 s t p = 250 s t j = 25 c t j = 150 c u cc from 7 v to 17v in steps of 1v u cc from 7 v to 17v in steps of 1v figure 3 pfc fwd typical diode forward current asa function of forward voltage i f = f( v f ) at t p = 250 s pfc 0 10 20 30 40 50 60 0,0 1,0 2,0 3,0 4,0 v f (v) i f (a) t j = 25c t j = t jmax -25c 0 10 20 30 40 50 0 1 2 3 4 v ce (v) i c (a) 0 10 20 30 40 50 0 1 2 3 4 v ce (v) i c (a) copyright vincotech 15 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 4 pfc igbt typical switching energy lossesas a function of collector current e = f( i c ) with an inductive load at t j = 25/125 c v ce = 400 v u cc = 15 v figure 5 pfc igbt typical reverse recovery energy lossas a function of collector current e rec = f( i c ) with an inductive load at t j = 25/125 c v ce = 400 v u cc = 15 v pfc t j = t jmax -25c e rec t j = 25c e rec 0,00 0,02 0,04 0,06 0,08 0 2 4 6 8 10 12 i c (a) e (mws) e off e on e on e off 0 0,05 0,1 0,15 0,2 0,25 0 2 4 6 8 10 12 i c (a) e (mws) copyright vincotech 16 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 6 pfc igbt typical switching times as afunction of collector current t = f( i c ) with an inductive load at t j = 125 c v ce = 400 v u cc = 15 v figure 7 pfc fwd typical reverse recovery time as afunction of collector current t rr = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v pfc t doff t f t don t r 0,00 0,01 0,10 1,00 0 2 4 6 8 10 12 i c (a) t ( m s) t rr t rr 0,00 0,01 0,01 0,02 0,02 0,03 0,03 0,04 0,04 0,05 0 2 4 6 8 10 12 i c (a) t rr ( m s) copyright vincotech 17 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 8 pfc fwd typical reverse recovery charge as afunction of collector current q rr = f( i c ) atat t j = 25/125 c v ce = 400 v u cc = 15 v figure 9 pfc fwd typical reverse recovery current as afunction of collector current i rrm = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v pfc t j = t jmax - 25c i rrm t j = 25c i rrm 0 4 8 12 16 20 0 2 4 6 8 10 12 i c (a) irr m (a) t j = t jmax - 25c q rr t j = 25c q rr 0,0 0,1 0,2 0,3 0,4 0 2 4 6 8 10 12 i c (a) q rr ( m c) copyright vincotech 18 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 10 pfc fwd typical rate of fall of forwardand reverse recovery current as a function of collector current d i 0 /d t ,d i rec /d t = f( i c ) at t j = 25/125 c v ce = 400 v u cc = 15 v figure 11 pfc igbt figure 12 pfc fwd igbt transient thermal impedance fwd transient thermal impedance as a function of pulse width as a function of pulse width z thjh = f( t p ) z thjh = f( t p ) at at d = t p / t d = t p / t r thjh = 4,77 k/w r thjh = 6,16 k/w igbt thermal model values fwd thermal model values r (k/w) tau (s) r (k/w) tau (s) 0,24 0,9339 0,16 2,278 2,01 0,09693 0,78 0,2352 1,56 0,03256 3,34 0,05952 0,71 0,004783 0,97 0,01208 0,25 0,000845 0,69 0,00294 0,23 0,000584 thermal grease thermal grease pfc t p (s) z thjh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t p (s) z thjh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 0 500 1000 1500 2000 2500 3000 0 2 4 6 8 10 12 i c (a) di rec / dt (a/ m s) di 0 /dt di rec /dt copyright vincotech 19 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 13 pfc igbt figure 14 pfc igbt power dissipation as a collector current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i c = f( t h ) at at t j = 175 oc t j = 175 oc u cc = 15 v figure 15 pfc fwd figure 16 pfc fwd power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i f = f( t h ) at at t j = 175 oc t j = 175 oc pfc 0 10 20 30 40 0 50 100 150 200 t h ( o c) p tot (w) 0 4 8 12 16 0 50 100 150 200 t h ( o c) i c (a) 0 5 10 15 20 25 30 0 50 100 150 200 t h ( o c) p tot (w) 0 4 8 12 16 0 50 100 150 200 t h ( o c) i f (a) copyright vincotech 20 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 17 pfc igbt safe operating area as a functionof collector-emitter voltage i d = f( v ds ) at d = single pulse t h = 80 oc u cc = 15 v t j = t jmax oc figure 18 pfc igbt reverse bias safe operating area i c = f( v ce ) at t j = t jmax 25 oc pfc v ds (v) i d (a) 10 0 10 -1 10 1 10 2 10 3 10us 100us 1ms 10ms 100ms dc 10 2 10 0 10 1 0 5 10 15 20 25 30 35 0 100 200 300 400 500 600 700 v ce (v) i c (a) i c max v ce max i c module i c chip copyright vincotech 21 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 1 rectifier diode figure 2 rectifier diode typical diode forward current as diode transient thermal impedance a function of forward voltage as a function of pulse width i f = f( v f ) z thjh = f( t p ) at at t p = 250 s d = t p / t r thjh = 3,54 k/w figure 3 rectifier diode figure 4 rectifier diode power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i f = f( t h ) at at t j = 150 oc t j = 150 oc input rectifier bridge 0 5 10 15 20 25 0,0 0,5 1,0 1,5 2,0 v f (v) i f (a) t j = 25c t j = t jmax -25c t p (s) z thjc (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 0 10 20 30 40 50 0 30 60 90 120 150 t h ( o c) p tot (w) 0 4 8 12 16 20 0 30 60 90 120 150 t h ( o c) i f (a) copyright vincotech 22 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 1 pfc shunt figure 2 dc shunt pulse power r1 pulse power r2 d r / r 0 < 1% after 1 pulse d r / r 0 < 1% after 1 pulse d r / r 0 < 1% after 10.000 cycles; duty cycle< 0,1% d r / r 0 < 1% after 10.000 cycles; duty cycle< 0,1% figure 1 thermistor typical ntc characteristicas a function of temperature r t = f( t ) thermistor shunt ntc-typical temperature characteristic 0 4000 8000 12000 16000 20000 24000 25 45 65 85 105 125 t (c) r ( ) t pulse (ms) p low (w) 10 1 singlerepetitive 10 1 10 2 10 0 10 0 10 2 10 3 10 4 10 3 10 1 t pulse (ms) p low (w) 10 1 singlerepetitive 10 3 10 2 10 0 10 1 10 0 10 1 10 2 10 3 10 4 copyright vincotech 23 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet t j 125 c figure 1 output inverter igbt figure 2 output inverter igbt turn-off switching waveforms & definition of t doff , t eoff turn-on switching waveforms & definition of t don , t eon ( t e off = integrating time for e off ) ( t e on = integrating time for e on ) u in (0%) = 0 v u in (0%) = 0 v u in (100%) = 5 v u in (100%) = 5 v v c (100%) = 400 v v c (100%) = 400 v i c (100%) = 4 a i c (100%) = 4 a t doff = 0,75 s t don = 0,64 s t e off = 0,95 s t e on = 0,82 s figure 3 output inverter igbt figure 4 output inverter igbt turn-off switching waveforms & definition of t f turn-on switching waveforms & definition of t r v c (100%) = 400 v v c (100%) = 400 v i c (100%) = 4 a i c (100%) = 4 a t f = 0,05 s t r = 0,03 s switching definitions output inverter general conditions = i c 1% v ce 90% u in 90% -25 0 25 50 75 100 125 -0,2 0 0,2 0,4 0,6 0,8 1 1,2 time (us) % t doff t eoff v ce i c u in i c 10% u in 10% t don v ce 3% -50 0 50 100 150 200 2,8 3 3,2 3,4 3,6 3,8 4 4,2 time(us) % i c v ce t eon u in fitted i c10% i c 90% i c 60% i c 40% -20 0 20 40 60 80 100 120 0,6 0,7 0,8 0,9 1 time (us) % v ce i c t f i c 10% i c 90% -50 0 50 100 150 200 3,6 3,65 3,7 3,75 3,8 time(us) % t r v ce i c copyright vincotech 24 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 5 output inverter igbt figure 6 output inverter igbt turn-off switching waveforms & definition of t eoff turn-on switching waveforms & definition of t eon p off (100%) = 1,61 kw p on (100%) = 1,61 kw e off (100%) = 0,12 mj e on (100%) = 0,20 mj t e off = 0,95 s t e on = 0,82 s figure 7 output inverter fwd turn-off switching waveforms & definition of t rr v d (100%) = 400 v i d (100%) = 4 a i rrm (100%) = 3 a t rr = 0,25 s switching definitions output inverter i c 1% u in 90% -20 0 20 40 60 80 100 120 -0,2 0 0,2 0,4 0,6 0,8 1 1,2 time (us) % p off e off t eoff v ce 3% u in 10% -50 0 50 100 150 200 2,8 3 3,2 3,4 3,6 3,8 4 4,2 time(us) % p on e on t eon i rrm 10% i rrm 90% i rrm 100% t rr -120 -80 -40 0 40 80 120 3,6 3,7 3,8 3,9 4 time(us) % i d v d fitted copyright vincotech 25 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet figure 8 output inverter fwd figure 9 output inverter fwd turn-on switching waveforms & definition of t qrr turn-on switching waveforms & definition of t erec ( t q rr = integrating time for q rr ) ( t erec = integrating time for e rec ) i d (100%) = 4 a p rec (100%) = 1,61 kw q rr (100%) = 0,35 c e rec (100%) = 0,09 mj t q rr = 0,55 s t e rec = 0,55 s switching definitions output inverter t qrr -100 -50 0 50 100 150 3,6 3,8 4 4,2 4,4 % i d q rr time(us) -20 0 20 40 60 80 100 120 3,6 3,8 4 4,2 4,4 time(us) % p rec e rec t erec copyright vincotech 26 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet ordering code in datamatrix as in packaging barcode as 201b06ipb004rcp952a40 p952a40 p952a40 201b06ipb004rcp952a40/3/ p952a40 p952a40 20pb06ipb004rcp952a40y p952a40y p952a40y 20pb06ipb004rcp952a40y/3/ p952a40y p952a40y x y 45 0 42 0 39 0 36 0 33 0 30 0 27 0 24 0 21 0 18 0 15 0 12 0 9 0 6 0 3 0 0 0 0,2 26,4 4,8 26,4 9,8 26,4 14,8 26,4 19,8 26,4 22,5 26,4 25,2 26,4 30,2 26,4 35,2 26,4 40,2 26,4 45,2 26,4 outline pinout ordering code & marking ordering code and marking - outline - pinout version without thermal paste, solder pins 9 10 pin table pin 12 3 4 5 6 7 8 27 with thermal paste, solder pins 2324 25 26 1920 1112 without thermal paste, press fit pinswith thermal paste, press fit solder pins 2122 1718 1314 15 16 copyright vincotech 27 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet vcc vbs rcin itrip enable fault lo1,2,3 ho1,2,3 v it,th+ 3.3v 0 0 0 15v 15v > v rcin,th 0 3.3v high imp /lin1,2,3 /hin1,2,3 15v 15v > v rcin,th 0 0 high imp 0 0 static logic funtion table application data copyright vincotech 28 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet pin # 12 3 4 5 6 7 8 9 1011 12 13 1415 16 17 18 19 20 21 22 23 24 25 26 27 pin descriptions pin name ?fault ?lin3 invs en invs + ntc1 ntc2 ?lin2 u v w dc2 + dc2 pfc dc1 pfc + (coil) dc1 + (coil) v cc ?hin1 ac2 ac1 freq vsense output for u phase inverter input dc + inverter input dc pfc returnoutput for v phase output for w phase pfc bulk voltage sense signal input for lowside u phase signal input for lowside v phase ?hin3 ?lin1 gnd2 ?hin2 inverter ground driver circuit supply voltage signal input for highside u phaserectifier input rectifier input pfc switching frequency adjustrectifier output dc pfc coil connector rectifier output dc + signal input for highside v phase temperature sensor connector 2 temperature sensor connector 1 pin description fault output, indicates over current or under voltage (negative logic, opendrain output) enable i/o functionality inverter sense resistor lowside inverter sense resistor highsidesignal input for highside w phase signal input for lowside w phase copyright vincotech 29 08 jun. 2015 / revision 1
20-1b06ipb004rc-p952a40 20-pb06ipb004rc-p952a40y datasheet disclaimer life support policy as used here in: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. the information, specifications, procedures, methods and recommendations herein (together information) are presented by vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. no representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. it is readers sole responsibility to test and determine the suitability of the information and the product for readers intended use. vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of vincotech. copyright vincotech 30 08 jun. 2015 / revision 1

▲Up To Search▲

Price & Availability of 20-1B06IPB004RC-P952A40-3

	To Download 20-1B06IPB004RC-P952A40-3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .